IDLS - Intelligent Dome Light System
Product No. 26 6002 - Technical Specifications
Round Low Profile Dome Light with Backup Battery Functionality - Description
The IDLS LED based dome light is designed to provide general purpose illumination within armored vehicles. Two operation modes are available, WHITE light mode and CYAN (bluish-green) light mode.
The design utilizes solid state technology and a constant current drive circuit to achieve a consistent and economical light output at an input range of 16...33VDC.
The IDLS control circuitry is based on a microcontroller which controls all functionalities of the module.
Operation mode is determined by a central command box within the vehicle connected to the IDLS unit through a suitable cable.
Light intensity is controllable from 0% to 100%.
The product is designed to meet the rigorous requirements of military ground vehicle environments.
Features
* Two light colors available – White and Cyan.
* Simple mounting – Mounted by 3 screw holes located in the base plate.
* Receptacle type – The unit utilizes two VG95234A-10SL-3PN receptacles.
"Daisy Chain" enables connection to other dome lights in the vehicle.
* Dimming control – dimming is accomplished through a potentiometer located on the product.
* White illumination – At a distance of 1m from target, the lamp provides a main illumination
footprint in an area larger than 1m x 1m, with a value greater than
45Lux on 0-0 axis dropping to a minimum 25Lux at the edges.
* Backup battery – Active while mains are disconnected or during vehicle power supply failure
event. Light colors are selectable by a push button.
* Vehicle’s battery monitoring – When the vehicle’s battery voltage falls below a predetermined value
(21.5V) the system automatically shifts to low voltage visual alert.
Product No. 26 6002 – Datasheet |
Light Output - White / Cyan |
Input Voltage |
16-33VDC |
Input Current |
200mA |
Power Consumption |
4.8 Watts |
Input Over Voltage Protection |
Included |
Input Reverse Voltage Protection |
Included |
Built-In EMI RFI Filter, Low Noise |
MIL-STD-461E |
Light Source |
LEDs |
White Light Output (at 1 meter) |
Minimum 45 Lux @ Center |
Cyan Light Output (at 1 meter) |
Minimum 10 Lux @ Center |
Dominant Wavelength (Cyan) |
505nm |
Light Beam Angle (swivel) |
100° |
Intensity Control (White & Cyan) |
0-100% |
Operating Temperature Range |
-40°C to +71°C |
Dimensions |
112mm (4.40) 37mm (1.45) |
Weight |
630g (1.38lbs) |
Receptacle Pin-out:
PIN |
Functional Description |
A |
(+) 28V Cyan Light |
B |
(–) Return |
C |
(+) 28V White Light |